Skip to main content
🎯 Your destination

Chip Design (ASIC / VLSI) Engineer in India

From Class 12 PCM and a B.Tech in electronics, to Verilog, CMOS and chip design tools, and a first job in chip design, verification, physical design or DFT

Reliable salary data not available.
⏱ A 4-year B.Tech or B.E., plus an optional 2-year M.Tech in VLSI🧭 Intermediate🗺️ 4 worlds · 13 missions

Not sure this is right for you? Find My Match →

Level 1 · Curious
⚡ 0 XP🔥 0 day streak

0 of 13 missions done

MMonTTueWWedTThuFFriSSatSSun

Is this career for you?

Two minutes before you commit months

Tick what sounds like you

Tick the ones that are true for you.

Skills you'll walk away with

Digital ElectronicsVerilog and SystemVerilogCMOS CircuitsDesign VerificationLogic Synthesis and TimingPhysical DesignDesign for Testability (DFT)EDA Tools and Linux Scripting

Jobs this leads to

  1. RTL (front-end) design engineer
  2. Design verification engineer
  3. Physical design engineer
  4. DFT (design for testability) engineer
  5. FPGA design engineer

Before you start

  • ✓ Class 12 (10+2) with Physics, Chemistry and Mathematics (PCM)
  • ✓ A B.Tech or B.E. in Electronics and Communication, Electrical, Electronics (VLSI Design and Technology) or a related branch
  • ✓ Strong basics in digital circuits and logic

13 missions to Chip Design Engineer in India

4 worlds, 13 missions. Tap any circle to open it; the glowing one is next.

World 1

Class 12 PCM and a B.Tech in electronics

Class 11-12, then entrance exams and counselling

0/3

Most chip design engineers hold a B.Tech or B.E. in Electronics and Communication, Electrical or a related branch. You get there through Class 12 PCM and an engineering entrance exam.

Not started
Chest: World 1 badgeFinish World 1 to open
World 2

Build core chip design skills in your B.Tech

Years 1-4 of your B.Tech

0/4

Use your degree to master digital electronics, a hardware description language, CMOS and the full chip design flow, and get hands-on time with real design tools.

Not started
Skills in this phase
Chest: World 2 badgeFinish World 2 to open
World 3

Specialise with an M.Tech, government programmes and internships

Final year of B.Tech, plus 2 years if you take an M.Tech

0/3

An M.Tech in VLSI through GATE is optional but common. Government programmes and long internships give you real project work before your first job.

Not started
Chest: World 3 badgeFinish World 3 to open
World 4

Land your first chip design job

Campus placements and the first years of work

0/3

Pick an entry role that fits your strengths, show proof of your skills, and keep learning as India's chip industry grows.

Not started
Chest: World 4 badgeFinish World 4 to open

More about this career

About the job, pay where you live, questions people ask, and where this career can take you next.

About the job

What you’d do

  • Design chip (SoC) modules using software and design tools, to a given specification
  • Write hardware code (RTL) in Verilog or SystemVerilog
  • Build testbenches and check that the design works before the chip is made
  • Take the design through logic synthesis, timing checks and physical layout
  • Add test logic so chips can be tested after they are made (DFT)

Where you’d work

  • Chip design (fabless) companies and start-ups
  • Chip design tool (EDA) companies
  • Academic and R&D organisations working on chip design

Directions you can take

  • RTL (front-end) design
  • Design verification
  • Physical design
  • Design for testability (DFT)
  • FPGA-based design

Every step in full

The complete text of every step, to read or print. Work through them in the journey above.

Class 12 PCM and a B.Tech in electronics 3 steps
  1. Take PCM in Class 11 and 12

    Physics, Chemistry and Mathematics are needed for B.Tech admission. Physics (electricity, semiconductors) and Mathematics are the base for everything you will do in chip design.

    Real-world task: Build a small circuit with an LED, a resistor and a battery, then explain how current flows through it.

    Why it matters: Chips are built from electronic devices; a clear idea of current, voltage and semiconductors makes later subjects much easier.

    Checklist

    • Choose PCM in Class 11
    • Pay extra attention to current electricity and semiconductor electronics in Physics
    • Build strong algebra and calculus skills
    Open this step ↑
  2. Write JEE Main, JEE Advanced or your state entrance test

    JEE (Main) and JEE (Advanced) ranks lead to JoSAA counselling, which in 2026 allocated seats in 138 institutes: 23 IITs, IISc Bengaluru, 31 NITs, IIEST Shibpur, 26 IIITs and 56 other government-funded technical institutes. Many states also run their own engineering entrance tests for state colleges.

    Real-world task: Make a list of 10 colleges that offer Electronics and Communication or Electronics (VLSI Design and Technology), with the exam each one uses for admission.

    Why it matters: Your entrance rank decides your college and branch, and the branch matters a lot for chip design jobs.

    Checklist

    • Register for JEE (Main) on the official NTA site
    • If you qualify, register for JEE (Advanced) for IIT seats
    • Check your state's engineering entrance test and counselling dates
    • Register and fill choices in JoSAA counselling if you qualify
    Open this step ↑
  3. Choose an electronics branch

    Pick Electronics and Communication, Electrical, or the newer Electronics Engineering (VLSI Design and Technology), for which AICTE has a model curriculum. Some colleges also offer a minor degree in VLSI.

    Real-world task: Compare the semester subjects of two colleges' ECE or VLSI programmes and mark every VLSI subject.

    Why it matters: An electronics branch gives you the device, circuit and digital subjects that chip design builds on, and many internships ask for these branches.

    Checklist

    • Read AICTE's model curriculum list for VLSI courses
    • Check whether your college has VLSI labs or chip design tool access
    • Ask seniors which electives cover digital design and VLSI
    Open this step ↑
Build core chip design skills in your B.Tech 4 steps
  1. Master digital electronics

    Learn number systems, Boolean algebra, Karnaugh maps, logic gates and their CMOS form, flip-flops, counters, finite state machines, and setup and hold time. These same topics appear in the Digital Circuits section of the GATE EC syllabus.

    Real-world task: Design a traffic light controller as a finite state machine and draw its state diagram.

    Why it matters: Every digital chip is built from these blocks; interviews for design and verification roles test them first.

    Checklist

    • Solve Karnaugh map and logic minimisation problems
    • Design counters and finite state machines on paper
    • Understand propagation delay, setup time, hold time and critical path
    Open this step ↑
  2. Learn Verilog, then SystemVerilog

    Verilog lets you describe hardware as code (RTL). Start with NPTEL's Hardware Modeling using Verilog (IIT Kharagpur). Then learn SystemVerilog, which verification teams use to build testbenches.

    Real-world task: Write a small 8-bit ALU in Verilog with a self-checking testbench, and put the code on a public repository.

    Why it matters: Front-end design and verification jobs are mostly about writing and checking hardware code.

    Checklist

    • Write and simulate an adder, a multiplexer and a counter in Verilog
    • Write a testbench that checks your design automatically
    • Learn the difference between code that can be built into hardware and code that only runs in simulation
    • Learn basic Linux commands and one scripting language such as Python or Tcl
    Open this step ↑
  3. Learn CMOS and the RTL to GDS flow

    Learn how transistors form gates (NPTEL: CMOS Digital VLSI Design, IIT Roorkee), then how a design moves from RTL through logic synthesis, verification, physical design and testing to the final GDS layout (NPTEL: VLSI Design Flow: RTL to GDS, IIIT Delhi).

    Real-world task: Draw the full RTL to GDS flow on one page and write one line about each step.

    Why it matters: Knowing the whole flow helps you pick your role (design, verification, physical design or DFT) and talk clearly in interviews.

    Checklist

    • Understand the MOSFET and how a CMOS inverter works
    • Learn what logic synthesis, static timing analysis and place and route do
    • Learn why chips are tested after they are made (DFT)
    Open this step ↑
  4. Get hands-on with chip design (EDA) tools

    Under MeitY's Chips to Startup (C2S) programme, the ChipIN Centre at C-DAC Bangalore gives design tools from Synopsys, Cadence and Siemens-EDA to institutions, with training. Ask whether your college is on the C2S EDA tool list.

    Real-world task: Take one of your Verilog designs through synthesis on a lab tool and note its area and timing results.

    Why it matters: Employers value students who have used real industry tools, not only simulators.

    Checklist

    • Check the C2S EDA Tools Support list for your college
    • Ask your VLSI faculty how students can use the lab tools
    • Finish one design project in a lab, from code to a timing report
    Open this step ↑
Specialise with an M.Tech, government programmes and internships 3 steps
  1. Write GATE in Electronics and Communication (EC) if you want an M.Tech

    You can write GATE from the 3rd year of your B.Tech. GATE 2027 is organised by IIT Madras. A valid score is used for admission to Master's and direct doctoral programmes, and M.Tech students can get financial assistance of Rs 12,400 per month, generally for 22 months. The EC paper covers mathematics, networks and signals, electronic devices, analog circuits, digital circuits, control, communications and electromagnetics.

    Real-world task: Mark which GATE EC topics (devices, analog, digital) you already know well and plan a revision timetable for the rest.

    Why it matters: An M.Tech in VLSI gives deeper training and access to more chip design labs and campus hiring; it is optional, not required.

    Checklist

    • Download the GATE EC syllabus from the official GATE site
    • Check eligibility and dates on the official GATE site
    • Shortlist M.Tech programmes in VLSI or microelectronics
    Open this step ↑
  2. Use the Chips to Startup (C2S) programme

    C2S aims to train 85,000 specialised people in VLSI and embedded system design over 5 years, at Bachelors, Masters and research level, through about 100 academic institutions and R&D organisations. Students take part through their institution's labs and projects.

    Real-world task: Write a one-page plan for a small chip design project you could do in a C2S lab with your faculty.

    Why it matters: C2S institutions get design tools and project funding that give students real chip design experience.

    Checklist

    • Check whether your college is a C2S institution
    • Ask your VLSI faculty about C2S projects you can join
    • Read the C2S internships page each semester
    Open this step ↑
  3. Apply for a long internship

    The C2S internships page has listed long internships and apprenticeships at companies such as Synopsys, Arm, Intel and NXP for B.Tech and M.Tech students. Each has its own rules: for example, Synopsys asked for a B.E. or B.Tech in Electronics, Electrical or Instrumentation, and Arm asked for 75% across 10th, 12th, UG and PG. For some, your college's C2S Chief Investigator sends student details to MeitY.

    Real-world task: Prepare a one-page resume listing your Verilog projects, tools used and NPTEL courses passed.

    Why it matters: A long internship often decides your first job: you work on real chip projects with an industry team.

    Checklist

    • Read the eligibility and deadline for each listed internship
    • Keep your marks high: some listings set marks or CGPA cut-offs
    • Talk to your college's C2S Chief Investigator about nominations
    Open this step ↑
Land your first chip design job 3 steps
  1. Pick your first role

    Common entry roles are RTL (front-end) design, design verification, physical design and DFT. Front-end and verification roles use Verilog and SystemVerilog most; physical design is about turning the design into a layout that meets timing; DFT adds logic so chips can be tested after they are made.

    Real-world task: Read 10 entry-level chip design job posts and list the skills that come up most often.

    Why it matters: A focused profile for one role is stronger than a general one in chip design interviews.

    Checklist

    • Decide which part of the RTL to GDS flow you enjoy most
    • Build one project that fits that role
    • Read job descriptions to see which tools and skills they ask for
    Open this step ↑
  2. Prepare for technical interviews

    Expect questions on digital electronics, CMOS, Verilog and timing, and be ready to explain your projects line by line.

    Real-world task: Explain your best Verilog project in five minutes to a friend, then answer their questions.

    Why it matters: Hiring is employer-led, so the interview and your projects are your main test.

    Checklist

    • Revise digital circuits, CMOS and setup and hold timing
    • Practise writing Verilog on paper without a computer
    • Be ready to explain every design choice in your projects
    Open this step ↑
  3. Keep learning as the industry grows

    The India Semiconductor Mission (ISM) works to build India's semiconductor and display ecosystem, and its Semicon 2.0 plan covers design and the talent ecosystem. New tools and methods keep coming, so keep studying through your career.

    Real-world task: Choose one advanced topic (for example low-power design or formal verification) and finish a course on it in your first year of work.

    Why it matters: Chip design methods change fast; steady learning keeps you moving to senior and lead roles.

    Checklist

    • Follow ISM and C2S news for new programmes
    • Take a new NPTEL course each year in your area
    • Learn the scripting and automation your team uses
    Open this step ↑

Questions people ask about Chip Design (ASIC / VLSI) Engineer in India

Clear answers regarding timelines, prerequisites, salaries, and study strategies.

Do I need a licence to work as a chip design engineer in India?

No licence or registration is named on the official pages checked for this roadmap. Hiring is employer-led: companies look at your degree, skills, projects and internships.

Is an M.Tech in VLSI required?

No, it is optional. A GATE score in Electronics and Communication (EC) can get you into an M.Tech, and M.Tech students can get financial assistance of Rs 12,400 per month, generally for 22 months. Some company internships listed on the C2S site, such as Synopsys's apprenticeship, were for B.E. or B.Tech graduates.

Which B.Tech branch should I choose?

Electronics and Communication, Electrical, or Electronics Engineering (VLSI Design and Technology), for which AICTE has a model curriculum. Company internships listed on the C2S site mostly ask for electronics, electrical or related branches.

Why is this job trending?

LinkedIn's Jobs on the Rise 2026 list for India (8 January 2026) puts application specific integrated circuit engineers 18th among the 25 fastest-growing jobs. It names SystemVerilog, Universal Verification Methodology (UVM) and RTL design as the most common skills.

How much do chip design engineers earn in India?

No official salary figure was verified for this roadmap, so none is shown here.